Tektronix TEK AM503B 252C AM5030 Reference free download

File name TEK AM503B_252C AM5030 Reference.pdf

The OUTPUT DC LEVEL knob vertically positions the Operating Guidelines signal on the oscilloscope screen. SRQ, and REMOTE indicators give you GPIB status. PROBE OPEN and OVERLOAD indicate probe and To prevent equipment damage and increase (AM5030 only.) Amplifier status. measurement reliability, observe these guidelines: The CURRENT/DIVISION display shows the current Amplifier scale factor in either The PROBE DEGAUSS AUTOBALANCE button H Never insert the Amplifier into, or mA/division or A/division. Error codes and removes residual magnetism from the attached remove it from, a power module unless output DC level also appear here. current probe. The probe must be removed from the power module is turned off. the test circuit and locked. H Never connect a current probe to, or The 20 MHz BW LIMIT button alternately selects The CURRENT/DIVISION buttons change the remove it from, the Amplifier while the or deselects the 20 MHz bandwidth limit for Amplifier scale factor. power module is on, or while the current noise filtering. probe is clamped around a current-carry- Hold down the GPIB ADDRESS button while The COUPLING button selects AC or DC probe ing conductor. adjusting the CURRENT/DIVISION buttons to coupling or a